Error code
GE / Oven
F + number or letter
An F followed by a number or letter, flashing with a control signal, is a general oven function error; the manual does not decode individual suffixes.
What it means
An F followed by a number or letter, flashing with a control signal, is a general oven function error; the manual does not decode individual suffixes.
This explanation is shared only by models whose manufacturer documents the same code, meaning, and guidance.
Manufacturer guidance
- Press Clear/Off and put the oven back into operation.
- If it repeats, disconnect all range power for at least 30 seconds, reconnect and call for service if the message returns.
- If it appeared during self-clean, check that the door latch is fully right, clear it and allow the oven to cool for one hour.
Manufacturer source
Models documented with this signal
Select your exact model below to open its manufacturer source. Manual editions and model revisions can differ.
If there is a safety risk, stop using the appliance and follow the manufacturer’s instructions.